Service Mode - Daewoo LM32L1 Service Manual

5. SERVICE MODE

Using the Service Remote controller(R-34SVC), you can enter service mode
directly.
Key Menu
S1 Heat Run Mode
S2 Gumi Ch Map Write
S3 Volume Test
S4 HDMI EDID WRITE
S5 Index All On
S6 Panel Test
S7 DEMPOL Ch Map Write
S8 White Balance
S9
S10 Select Type
Sub Menu Default Vallue
Full White
Gumi Ch Map Write
EDID Write
Volume Min
EDID Write...Wait! display like this:
CUT OFF_R
CUT OFF_G
CUT OFF_B
DRIVE_R
DRIVE_G
DRIVE_B
MODEL SL-602M/P
PANEL
BUYER
-15-
To enter into Heat Run Mode
To set Gumi factory channels directly
HDMI EDID Writing automatically.
(same function on S4)
To set sound(display in sequence)
Perss S3 key again and again,
change like this: 'Volume Min' -
'Volume Middle' - 'Volume Max' -
'Balance L' - Balance R'
When it is finished,
FINISH
HDMI1 EDID Success, HDMI2 EDID Success
Turn on the all LED of INDEX(Smart Icon)
To check the defective pixel of LCD
panel Using
Green - Blue - White - Black - Gray'
To set DEMPOL channels dirctly
0
0
0 To display offset and drive value at
0 mode above
0
0
Using
'SL-601T' and 'SL-602P' and 'SL-602M'
LG-32 Using
'AUO_26' - 'SAMSUNG_26' - 'LG_32' -
'SAMSUNG_32' - 'LG_37' '
'
Daewoo Using
'Daewoo' and 'IRAN' and 'Newziland' -
'Others' and Indonesia
Description
/ buttons, 'Full Red -
/ buttons, select between
/ buttons, select between
' ' '
/ buttons, select between
/
'