Service Mode - Daewoo LX32L1 Series Service Manual

4. Service mode.

Using the Service Remote controller(R-74S01 or R-34SVC ),
you can enter service mode directly.
K y e
S 1
S2 Gumi Ch Map Write
S3 Volume Test
S4 ADC adjust menu
S5 White balance adjust menu
S 6
S 7
S8 Factory Setting menu
S9 Software version & date display
S10 S10
S 1 1
S12 Shipping Mode
( Tip : There isn't service remocon, you can enter Factory sett ing mode with user remocon.
Press password in sequence : Menu --> 1-->1 -->4--->7 .
After factory setting osd display, you can select and
M e n u
N t o
To set Gumi factory channels directly
To set sound(display in sequence)
Perss S3 key again and again,
change like this: 'Volume Min' -
'Volume Middle' - 'Volume Max' -
'Balance L' - Balance R'
Show ADC adjust menu and off(toggle key)
Show W/B adjust menu and off(toggle key)
If you want to change white balance data, press
then press
N t o
N t o
Show Factory menu and off(toggle key)
Show software version and off( toggle key)
Not use Not use
N t o
To initialize TV and make TV standby mode
D s e i r c
u e s
key to select option that you want to adjust
key to adjust.
u e s
u e s
u e s
adjust with
-6-
t p o i n
key. )