Related Manuals for Daewoo DLX-32C7
Summary of Contents for Daewoo DLX-32C7
-
Page 1: Instruction Manual
LCD TELEVISION INSTRUCTION MANUAL DLX-32C7 DLX-37C7 DLX-42C7 Proper use guarantees product life. Before using the product, be advised that you read this owner’s manual well and try to operate it. - Page 2 Caution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulat- ed “dangerous voltage”...
-
Page 3: Power Source
Important Safeguards Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1. Read, Retain and Follow All Instructions Read all safety and operating instructions before operating the TV. Retain them safely for future reference. -
Page 4: Replacement Parts
Important Safeguards 13. Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. - Page 5 Warning This section must be read carefully and followed by the user prior to the operation of the product. The manual states important instructions for the user's own safety, and the proper operation of the product. In case of an accident, please unplug the unit from the outlet immediately. To reduce the risk of electric shock, do not Do not put any object that contains water - such as flowerpot - near to the unit.
- Page 6 Warning This section must be read carefully and followed by the user prior to the operation of the product. The manual states important instructions for the user's own safety, and the proper operation of the product. Please keep the user's manual in a safe place for future reference. Do not put volatile substance-such as Do not spill water or drop the remote control Do not view the TV too closely since it may...
-
Page 7: Table Of Contents
Table of Contents Installation and Maintenance Supplied Accessories Antenna Connection Video Connection Camcorder & Video Game Connection DVD Player Connection STB(Set Top Box) Connection PC Connection Cable TV Broadcasting Connection Name of Each Part Basic Guide Functionsa of the Remote Control Basic Menu To Watch TV Setting Up TV Stations... -
Page 8: Supplied Accessories
Supplied Accessories Make sure that the following accessories are provided with the product. AC cord AC cord Instruction manual Remote control Batteries Cable holder Cover Bottom -When installing wall mount, set the cover bottom as shown above Wall Mounting Unit (OPTIONAL) The method of wire arrangement 1. -
Page 9: Antenna Connection
Antenna Connection Indoor Antenna Connection 1. Connect the feeder cable of the antenna to the combining adapter. WHEN THE IMAGE IS NOT CLEAR : Unclear screen image and bad reception may be a cause of wrong antenna connection. Be sure to check its direction and place when installing. - Page 10 Antenna Connection Antenna Connection When a coaxial cable is used : Plug the coaxial cable to the antenna socket on the wall. Antenna socket at the back of the TV set When a feeder cable is used : Plug the coaxial cable to the antenna socket on the wall. Antenna socket at the back of the TV set Combining adapter...
- Page 11 Antenna Connection Outdoor Antenna Connection Outdoor Antenna connection-such as VHF or/and UHF-may be necessary for installation at private houses Single Antenna Connection REAR OF THE TV SET VHF Antenna PC/HDMI1 AUDIO UHF Antenna R-AUDIO-L VIDEO AUDIO SERVICE Separate Antenna Connection.
-
Page 12: Video Connection
Video Connection Connecting with an External Source You can make the connection with the AV input. REAR OF THE TV SET PC/HDMI1 AUDIO R-AUDIO-L VIDEO AUDIO SERVICE... -
Page 13: Camcorder & Video Game Connection
Camcorder & Video Game Connection Watching the Camcorder Recording or Video Game on TV 1. You can use the RCA connector. 2. These connectors connect to AV as shown below. 3. Turn on the TV set and camcorder/video game. 4. Press "INPUT" and then You can see input menu. Select AV mode by pressing " "... -
Page 14: Dvd Player Connection
DVD player connection When connecting with a component cable REAR OF THE TV SET PC/HDMI1 AUDIO R-AUDIO-L VIDEO AUDIO SERVICE Note : When you connect with the component, please check the color of cable between DVD and TV set. When connecting with a RCA cable REAR OF THE TV SET PC/HDMI1 AUDIO R-AUDIO-L... -
Page 15: Stb(Set Top Box) Connection
STB(Set Top Box) Connection When connecting with a HDMI cable REAR OF THE TV SET PC/HDMI1 AUDIO R-AUDIO-L VIDEO AUDIO SERVICE When connecting with a component cable REAR OF THE TV SET PC/HDMI1 AUDIO R-AUDIO-L VIDEO AUDIO SERVICE Set Top Box... -
Page 16: Pc Connection
Connection When connecting with PC(D-Sub) cable. 1. Adjust PC resolution to available resolution in LCD TV. 2. Connect the PC and TV set using the D-Sub and Audio cable like below the picture. 3. Turn on the PC and TV set. 4. - Page 17 Connection PC CONNECTION NOTES 1) If there is a [Vertical Frequency] setting menu in the [Screen] Menu of the PC, adjust the frequency to 60Hz. 2) If the PC resolution is too high, it may be hard to read letters. Select a suitable resolution. 3) HDMI input port receives only Digital Signal.
-
Page 18: Cable Tv Broadcasting Connection
Cable TV Broadcasting Connection External Input Connection Source Watching cable television is only possible after you have subscribed to the local broadcasting company and installed a cable receiver. You may make the connection to either the Component or the AV input. PC/HDMI1 AUDIO R-AUDIO-L VIDEO... -
Page 19: Name Of Each Part
Name of Each Part Front Panel and Side Buttons on the TV set have the same functions as those of the remote control. INPUT MENU POWER SIDE OF THE TV SET Control Key Buttons. INPUT Button : Each time you press this button, the TV will cycle through: AIR/CABLE Component HDMI1... -
Page 20: Functionsa Of The Remote Control
Functions of the remote control 1. POWER : Turns the TV on and off. POWER MUTE 2. MUTE : Press this button, and the sound goes off. Press again, and the sound returns. 3. NUMBER : Press the numbers on this board; you can select CH directly in TV mode. -
Page 21: Basic Menu
Basic Menu Basic Menu - The basic menu appears on the screen if you press the menu button of the remote control. - There are 5 items Picture, Sound, Channel, Features, and Time in the basic menu. - Each item has sub-items under it. If the desired item is selected, the relevant sub-items are displayed upward. -
Page 22: To Watch Tv
To Watch TV Power, Number, OK, Mute, Input, - Buttons with same name in the main body performs the same function. Press the “POWER” button on TV set or Remote control. POWER Note: MUTE • The buttons of the remote control and the main body operate only when AC power turn on. - Page 23 To Watch TV 1. Press the “POWER” button on TV set or remote control. • The Stand-by LED lamp turns on in red color. • Press the “POWER” button on the TV set or remote control. • The Stand By LED lamp on the front panel begins to flicker in red color and the TV turns on.
-
Page 24: Setting Up Tv Stations
Setting Up TV Stations Auto Search to find Channels - All stations that can be received are stored by this method. It is recommended that you use Auto tuning during installation of this set. 1. Press the “MENU” button to select the Channel menu. •... - Page 25 Setting Up TV Stations Fine tune 1. Searching for channel finely • Select a Channel number you want to tune finely with the “ CH ” buttons. • Press the “MENU” button and move to the Channel menu. • Move the selection bar to the Fine tune with ” ”...
- Page 26 Setting Up TV Stations FAV CH - You can set channel you watch frequently as favorites. 1. Programing Favorite Channel. • Press MENU button. Select Channel by pressing " " button. • Select Edit Channel selection bar by pressing " "...
-
Page 27: Selection Of Tv/Video Input Signal
Selection of TV/VIDEO Input Signal When watching video, Camcorder, DVD, Cable TV with External Input - When you presses INPUT Button, You can select as follows by pressing ” ” and “OK” buttons. AIR/CABLE Component HDMI1 HDMI2 OPTION INPUT MENU EXIT Analog INPUT... -
Page 28: Selection Of Multimedia Input Signal
Selection of Multimedia Input Signal When connecting PC, STB, DVD with Multimedia 1. When you presses INPUT Button, You can select as follows by pressing the ” ” buttons. AIR/CABLE Component HDMI1 HDMI2 OPTION INPUT MENU EXIT INPUT INPUT PC VGA HDMI 2 INPUT INPUT... -
Page 29: Selection Of Media(Usb) Input Signal
Selection of Multimedia Input Signal HDMI & PC & Component mode 1. If the message ‘No signal’ appears on the screen, adjust the PC output to a format listed in the Multimedia Input table. Multimedia Input Format Resolution V-freq HDMI PC(D-Sub) Component Standard... -
Page 30: Picture Adjustment
Picture Adjustment Adjustment of Aspect ratio in TV/Video/Component mode 1. Press the "MENU -> Picture -> Aspect Ratio" button. • The screen changes as below whenever by pressing the " " button. 16:9 ZOOM 1 ZOOM 2 16:9 Noise Reduction Noise Reduction Color temp. - Page 31 Picture Adjustment Adjustment of the screen in the PC mode 1. Select Picture by pressing the "Menu" button. • The menu screen appears as follows. MENU EXIT GUIDE FAV CH MEDIA P MODE INPUT STILL 2. Select PC Screen Mode •...
- Page 32 Picture Adjustment When setting up various screen modes - The user may select various screens designed for a good picture without adjusting the brightness, contrast or color individually. 1. Picture Mode selects what you want. • Press MENU button and Select Picture mode by pressing ” ”...
- Page 33 Picture Adjustment When adjusting the screen to taste - You can enjoy various screens by adjusting Brightness, Contrast, Color, Tint, Sharpness, Noise Reduction, Color Temp., Dimming, Aspect Ratio, PC Screen Mode(Only in PC Mode), etc to the user’s taste. 1. Select Picture by pressing the “Menu” button. •...
-
Page 34: Sound Adjustment
Sound Adjustment When selecting various sound Effects 1. Sound mode selects what you want. • Move to Effect in the Sound menu. • Select desirable Sound mode by pressing the ” ” buttons. • The Screen status changes as followed : Dynamic Bass ST Voice Dynamic Bass Normal... - Page 35 Sound Adjustment When adjusting sound to taste 3. Sound mode selects what you want. • Move to Mode in the Sound menu. • Select desirable Sound mode by pressing the ” ” buttons. (under the effect mode is off) • The Sound status changes as followed : User Normal Movie Music...
- Page 36 Sound Adjustment When adjusting sound to taste 4. Adjust the audio Equalizer • Move to Mode in the Sound menu. User Equalizer • Select User mode by pressing the ” ” buttons. Auto Volume Control Speaker • Select and use the relevant frequency by pressing the ”...
-
Page 37: Features - Closed Caption
Features - Closed Caption Viewing Closed Caption (On-Screen Text Messages) 1. Caption mode selects what you want. • Move to Caption in the Features menu. Child Lock Language English • Select Caption by pressing the ” ” buttons. Caption Menu Opacity MGDI Demonstration Initialize Move... -
Page 38: Features - Child Lock
Features - Child Lock Adjustment of Child Lock - The Child Lock feature prevent the use of the TV set without the remote controller. - If “Child Lock” is “ON”, the set can be only controlled by remote controller. Chile Lock 1. -
Page 39: Features - Etc
Features - ETC When viewing how MGDi improves the picture. 1. Setup of MGDi Demonstration Child Lock • Move to MGDi Demonstration in the Features menu. Language English Caption Menu Opacity • Press the ” ” buttons. In this demo version of MGDI Demonstration Initialize MGDi you can only see the functional difference of... -
Page 40: Time Setting
Time Setting Adjustment of Time / Adjustment of On Timer 1. Current Time Set Current Time Set AM 12:00 • Move to Current Time Set in the Time menu. Sleep Timer On Timer • To go to the Current Time Set, press the “ “... - Page 41 Time Setting Adjustment of Off Time 1. Setting the Off Timer Current Time Set AM 12:00 • Move to Off Timer in the Time menu. Sleep Timer On Timer • Press the ” ” buttons. Off Timer • Select the Off Timer to "On" by pressing the ” ”...
-
Page 42: Channel Banner
Channel Banner Channel Banner - The channel banner displays informations about current channel. - You can see this banner by pressing “OK” button on the Remote Controller. MENU EXIT GUIDE FAV CH MEDIA P.MODE INPUT STILL 1. General Information Display the Favorite channel. Displays the current channel number. -
Page 43: Troubleshooting
Troubleshooting Symptoms and Solutions Please check the following items before asking for repair service. Symptom Check items Neither picture - Check the contact of sockets is all right. nor sound - Check the TV main power is on. Picture is OK - Check the Volume control is set to minimum or mute. - Page 44 Troubleshooting In PC mode In PC mode SYMPTOM CHECKS - Check the resolution and frequency of your PC. Then, adjust them to optimum condition for LCD TV. “NO SIGNAL” appears on the screen. - Refer to the table of PC mode input format. (If registered resolution and Frequency on the table no listed then no picture will be displayed.) “Not available”...
-
Page 45: Standard Of Product
Standard of Product Screen Size 32” 37” 42” Aspect Ratio 16:9 LCD Panel Resolution 1366 x 768 (WXGA) Pixel Pitch 170.25 x 510.75 x RGB 0.200 x 0.600 mm x RGB 0.227 x 0.681 mm x RGB Dimension(W x H x D) Set Dimension 796 x 563 x 244mm 927 x 656 x 320mm...
Need help?
Do you have a question about the DLX-32C7 and is the answer not in the manual?
Questions and answers