Front Forks - X-TREME Rubicon 48V Owner's Manual

FRONT FORK (SR SUNTOUR Models XCT26"/700C)
80mm refers to the limit of Travel length of the forks. Please note these forks are designed only for casual riding on city road surfaces or off road on mountains or dirt
roads, but not for stunt movements or downhill racing!
These forks feature a LOCK function. When pedaling on flat surface road, lock the forks to save energy when braking to starting pedaling again. You should unlock
forks while climbing or descending on bumpy mountain roads to protect your hand or wrist from being injured from the impact. CAUTION! NEVER REACH FOR
THE LOCK BUTTON BY LEANING FORWARD DURING PEDALING AS THIS MOVE MAY CAUSE A SEVERE ACCIDENT, INJURY OR DEATH.
FOR YOUR OWN SAFETY, BE SURE TO STOP AND GET OFF OF THE BIKE TO LOCK OR UNLOCK FORKS!
17
NOTE: We strongly suggest that your SUNTOUR forks to be installed or replaced by a skilled and qualified
bicycle mechanic as knowledge and specialized tools are needed to complete.
the forks on your own, we request you consult X-TREME SCOOTERS for assistance or seek Tech Support from
the professionals at a local bike store. Please note that incorrect installation is extremely dangerous and can
cause damage to your bicycle and/or possible injury or death to the rider.
DO NOT ATTEMPT TO DISASSEMBLE A SUSPENSION FORK YOURSELF. Consult
X-Treme E-Bikes for assistance.
SAG SETTINGS
The SAG is the compression created by the impact from rider's weight and gravity. Different riders will have
different weights so therefore you need to know about the PELOAD function to achieve the correct settings for
riding according to your weight.
To increase the PRELOAD of the forks turn the PRELOAD button clockwise located at the position No. 2 in
the illustration.
Model Max Rotor
Diameter (mm)
XCT/M Series 160 mm
Should you attempt to install
Travel SAG
80 mm 15% - 20%