Safety Checklist - X-TREME Rubicon 48V Owner's Manual

SAFETY CHECKLIST

Before first initial ride and every ride after, it is important to carry out the following safety checks:
1. Brakes

Ensure front and rear brakes work properly.

Ensure brake calipers are not over worn and are correctly adjusted.

Ensure brake control cables are lubricated, correctly adjusted and display no obvious wear.

Ensure brake control levers are lubricated and tightly secured to the handlebar.
2. Wheels and tires

nsure tires are inflated to within the recommended limit as displayed on the tire sidewall.
E

Ensure tires have tread and have no bulges or excessive wear.

Ensure rims run true and have no obvious wobbles or kinks.

Ensure all wheel spokes are tight and not broken. You can use the include spoke wrench to ensure all spoke are tight.

Check that axle nuts are tight. If your bicycle is fitted with quick release axles, make sure locking levers are correctly tensioned and in the closed position.
3. Steering

Ensure handlebar and stem are correctly adjusted and tightened, and allow proper steering.

Ensure that the handlebars are set correctly in relation to the forks and the direction of travel.

Check that the headset locking mechanism is properly adjusted and tightened.

If the bicycle is fitted with handlebar end extensions, ensure they are properly positioned and tightened.
4. Chain

Ensure chain is oiled, clean and runs smoothly.

Extra care is required in wet or dusty conditions
5. Bearings

Ensure all non-sealed bearings are lubricated, run freely and display no excess movement, grinding or rattling.

Check headset, wheel bearings, pedal bearings and bottom bracket bearings.
6. Cranks and Pedals

Ensure pedals are securely tightened to the cranks.

Ensure cranks are securely tightened to the axle and are not bent.
7. Derailleurs

Check that front and rear mechanisms are adjusted and function properly.

Ensure shift and brake levers are attached to the handlebar, shift and brake.

Ensure derailleurs, shift levers and shift and brake cables are properly lubricated.
9