X-TREME Rubicon 48V Owner's Manual page 16

Wedge
Head Tube
Compression Bolt
Top Cap
Stem Clamp Bolts
Spacer
Bearing Race
Bearing Retainer
Upper Headset Cup
Bearing Retainer
16
Handlebar
Stem Cap Bolt
Headset Wedge
Cap
Bearing Dust Cover
Bolts
Star Nut
(Inside Steer Tube)
Headtube
Lower Headset Cup
Bearing Dust Cover
Headset Crown Race
.
Stem Installation (should be assembled on the bike already)
1. Insert the compression bolt through the top cap and the stem. Begin
threading into the star nut.
2. Tighten compression bolt so it removes all play from the fork, but allows
the fork to rotate smoothly.
3. Align the stem with the front wheel. Tighten the stem clamp bolts to
secure the stem to the steering tube
Handlebar Installation
1. Remove the stem cap bolts and stem cap.
2. Insert handlebar into the stem cap.
3. Tighten the stem cap bolts equally. Note the distance between the stem and
stem cap "A" should be equal on the top and bottom of the stem cap
.