Table of Contents
Advertisement
Interface Module
2
Interface Module: TPS-IMC-BV
composite and S-video input for TV video card. Consult the latest
revision of the TPS-VID Operations & Installation Guide (Doc. 5869)
for details. Use either the two BNC connectors (unbalanced video) or
the eight-pin RJ45 connector (balanced video) when connecting to a
video source. Description of the pinouts for the RJ45 is shown in the
table after this paragraph. Depending on which connector is used,
toggle the BAL/COAX switch, centrally located on the top face,
accordingly.
BALANCED VIDEO Pinouts (RJ45 Port)
PIN #
DESIGNATION
1
N/C
2
N/C
3
C+
4
Y+
5
Y-
6
C-
7
N/C
8
N/C
Physical Views of the TPS-IMC-BV
24VDC 2.0A – This direct current (DC) power socket connector is used
to supply power to the touchpanel via the external power pack. Use of
this connector and power pack is optional and depends on whether
network power is available. If necessary, connect an external power
pack to the stationary interface module rather than the touchpanel
directly. Crestron recommends specific power packs for its devices.
The supplied power pack for the TPS-IMC-BV is Crestron part number
PW-2420RU. If a power pack other than this crestron model is
obtained, verify that it meets the required specifications and polarity as
shown after this paragraph.
Crestron TPS-IMC-BV
DESCRIPTION
Not Connected
Not Connected
Chrominance (Positive)
Luminance (Positive)/Composite
Luminance (Negative)/Composite
Chrominance (Negative)
Not Connected
Not Connected
7.70 in
(19.56 cm)
Operations Guide - DOC. 5921
3.20 in
(8.13 cm)
1.25 in
(3.18 cm)
Advertisement
Table of Contents
