Crestron TPS-IMC-BV Operation Manual page 8

Interface Module
4 Interface Module: TPS-IMC-BV
RGB to the Panel Pinouts (RJ45 Port)
PIN # DESIGNATION
1 V-
2 H-
3 R-
4 R+
5 G-
6 G+
7 B-
8 B+
9 H+
10 V+
AUDIO – This 8-position RJ45 mates with the TPS-5000 or TPS-6000
touchpanel. A Triamese cable (15884) is supplied with the
TPS-XVGA-BV. This port provides audio input to the touchpanel and
mic out from the touchpanel to audio amplifiers. Description of the
pinouts is shown in the table after this paragraph.
AUDIO Pinouts
PIN # DESCRIPTION
1 Audio Shield
2 Audio Left +
3
4 Audio Right +
5 Audio Right -
6 Mic Out Shield
7
8
AUDIO INPUT – This port is designed for future use. This 8-pin RJ45
port mates with an audio switcher, if available. Description of the
pinouts is shown in the table after this paragraph.
AUDIO INPUT Pinouts (RJ45 Port)
PIN # DESCRIPTION
1
2
3
4 Audio Left +
5 Audio Left -
6
7 Audio Right +
8 Audio Right -
AUDIO INPUT – The port mates with a six-pin connector, supplied,
and provides differential/single ended audio input and output.
Description of the pinouts is shown in the table after this paragraph.
Crestron TPS-IMC-BV
DESCRIPTION
Vertical Sync (Negative)
Horizontal or Composite (Negative)
Red Video (Negative)
Red Video (Positive)
Green Video (Negative)
Green Video (Positive)
Blue Video (Negative)
Blue Video (Positive)
Horizontal or Composite (Positive)
Vertical Sync (Positive)
Audio Left -
Mic Out +
Mic Out -
Mic +
Mic -
Mic +
Mic -
Operations Guide - DOC. 5921