Network Connection Function Menu Operations - Casio XJ-UT310WN Network Function Manual

Network Connection Function Menu Operations

While there is a LAN connection between the projector and a computer, you can use the items on the
Network Connection function menu (which appears when you click the function menu button) to
perform the operations described below.
To do this:
Prioritize display speed over projection
screen image quality
Prioritize projection screen image
quality over display speed
Output computer audio from the
1
projector speaker*
Switch from main screen projection to
extended screen projection*
Switch from extended screen projection
to main screen projection
Use a smart device for remote control
of a computer that is running Network
Connection
Configure projector network settings
Remotely control the projector over a
LAN connection
Upload a file to projector internal
memory
Change the wireless LAN connection to
another projector
Create a copy of Network Connection
on a USB flash drive
Delete connection information
(passphrase) stored by Network
Connection
Show the IP address and login code of
the projector connected via LAN
Display Network Connection version
information
Exit Network Connection
*1 In the case of Windows XP, which does not support audio level mixer functions, a driver must be
installed to enable these functions. See "Add-on Driver Software for Windows" below.
*2 With Windows XP and Windows Vista, installation of driver software is required to enable these
functions. See "Add-on Driver Software for Windows" below.
Select this function menu item:
[Projection Setting] 3
[High-speed]
[Projection Setting] 3
[High-resolution]
[Audio Out]
[Select the Projection Screen] 3
2
[Extended Screen]
[Select the Projection Screen] 3
[Main Screen]
[PC Remote]
[Admin Screen]
[Admin Screen]
[Admin Screen]
[Server Search]
[Token Wizard]
[Initialize]
[Info]
[About]
[Exit]
Refer to:
"Outputting Computer Audio from
the Projector Speaker" (page 42)
"Remotely Controlling a Computer
from a Smart Device" (page 44)
"Using the Projector Admin Pages"
(page 52)
"Remotely controlling the Projector
Over a LAN Connection" (page 64)
"Uploading a File to Projector
Internal Memory" (page 67)
"To terminate the current wireless
LAN connection and re-connect"
(page 45)
"Using the Token Wizard" (page 74)
"To delete connection information
(passphrase) stored by Network
Connection" (page 45)
41
–
–
–
–
–
–