Table of Contents
Advertisement
To use a projector generic SSID to establish a wireless LAN
connection and project
Projector Operation
1.
Connect the wireless adapter to the projector (page 10) and then turn on the
projector.
The input source will automatically switch to "Network" and projection of the LAN connection
standby screen will start.
If projection of the LAN connection standby screen does not start, press the [INPUT] key. On
the "Input" dialog box that appears, use the [ ] and [ ] keys to select "Network" and then
press the [ENTER] key.
2.
Press the [MENU] key and then select the following: "Network Settings" 3
"Projector Wireless LAN Settings" 3 "SSID". On the dialog box that appears,
select one of the following: casiolpj0101, casiolpj0102, casiolpj0103, or
casiolpj0104.
This operation is not necessary if you plan on using only one projector without changing the
initial default SSID setting (casiolpj0101). Advance to step 6.
3.
Press the [ESC] key twice to return to "Network Settings".
4.
Use the [ ] key to select "Update Network Settings" and then press the [ENTER]
key.
This will display a confirmation dialog box asking if you want to update network settings.
5.
Press the [ ] key to select "Yes", and then press the [ENTER] key.
This applies the SSID change to the projector and closes the dialog box. Wait until the LAN
connection standby screen starts to be projected again.
If multiple projectors are in use nearby, select a separate SSID for each projector.
15
Advertisement
Table of Contents
