Remotely controlling the Projector Over a LAN Connection
You can use the procedure below to control the projector from a computer or other external device
over a LAN connection.
To remotely control the projector from a computer connected
via a LAN
1.
Referring to "Logging In to the Projector Admin Pages over a Wireless LAN
Connection" (page 53), log in to the Projector Admin pages.
2.
In the left pane, click "Control Panel".
This will display the "Control Panel" page.
Projector remote control items are those surrounded by the red boundaries above. For
detailed information about each of these items, see "Control Panel Page Remote Control
Items".
For information about items other than the above (Network Settings items), see "To configure
Control Panel page network settings" (page 59).
64