Table of Contents
Advertisement
To do this:
Connect the projector to an external
wireless access point
Do not connect the projector to an
external wireless access point
4.
To reflect "Network Settings" page changes on the projector, click [Apply].
A dialog box will appear telling you that you need to restart the projector in order to reflect the
settings.
5.
To restart the projector and reflect the changed settings, click [OK].
To cancel projector re-start without changing settings, click [Cancel] instead of [OK].
Clicking [OK] will reflect the changed settings and restart the projector. The LAN connection
between the projector and computer will be terminated at this time.
Perform this operation:
In the "External Access Point" area, click "Enable" and configure settings
as required.
For details, see step 6 through 9 under "To connect the projector to a
wireless LAN access point" (page 30).
In the "External Access Point" area, click "Disable".
61
Advertisement
Table of Contents
