Table of Contents
Advertisement
8.
On the "Enter the login code." dialog box that appears, input the required login
code.
In the "Login Code" box, input the four-digit number shown in the upper left corner of the LAN
connection standby screen that is being projected.
9.
When everything is the way you want, click [OK].
This will cause the Network Connection window to change as shown below, and projection of
the computer screen image (main window) will start.
For details about Network Connection window operations, see to "Using Network
Connection" (page 39).
10.
To discontinue computer screen projection, click the close button (
upper right corner of the Network Connection window.
This closes the Network Connection window and returns the projected image to the LAN
connection standby screen.
Note
When using the above type of connection, settings can be configured to eliminate the need for
login code input. For information about how to configure such settings see "To configure
Control Panel page network settings" (page 59).
37
) in the
Advertisement
Table of Contents
