Wavetek MS1200 Operation Manual page 26

COPY REMOTE PLAN
You can easily copy a channel plan from one microStealth unit to
another. This saves you time when configuring multiple units.
First, connect a cable between the two microStealth units. Select
COPY REMOTE PLAN only on the unit that you want to copy the
channel plan to. A list of all available channel plans found on the
remote unit appears. Use the up or down arrow to highlight the
plan that you want to copy. Press the softkey to begin copying
the plan.
Important
Be sure that the baud rate setting of your microStealth matches that
of the device that it is connected to (see BAUD RATE).
26