Wavetek MS1200 Operation Manual page 17

SCAN AUDIO CARRIERS
Select YES if you want to see the audio carriers in the full scan
screen. You can achieve a faster scan by omitting the audio carriers.
SCAN SCRAMBLED CHANNELS
Scrambled channels require more time to measure. You can achieve
a faster scan by omitting scrambled channels. Select YES if you
want to see scrambled channels in the full scan screen.
EDIT TEST POINTS
Your microStealth is capable of performing tests at various locations
including; SUBSCRIBER DROP, GROUND BLOCK, TAP, and
USER DEFINED (or CUSTOM). Each test point has its own set
of limits that you can edit. Press the key to edit the test points.
A list of available test points appears.
You can enable or disable each test point in the list. When a test
point is disabled, you cannot use it when performing tests. Use the
up or down arrow to highlight the desired test point. If the high-
lighted test point is disabled, you can enable it by pressing the
soft key. A check mark appears in the left-hand column to indicate
when a test point is enabled. If the test point is already enabled,
pressing the soft key disables it.
17