Wavetek MS1200 Operation Manual page 15

Important
The baud rate of both your microStealth and your printer must
match (see BAUD RATE).
Tip
A serial to parallel converter (such as the on manufactured by Black
Box Corp.) can be used for printing to a parallel printer.
LINES/PAGE
For text reports, you can specify the number of lines that will be
printed on each page before a form feed command is sent. Enter 0
if you do not want any form feeds to be sent.
BAUD RATE
This is the baud rate that is used when your microStealth communi-
cates with another device through the serial port. Generally, you
will want to use the highest rate supported. Be sure that the baud
rate setting of your microStealth matches that of the device that it is
connected to.
CLONE
You can easily transfer the entire configuration from one
microStealth unit to another. This saves you time when configuring
multiple units. First, connect a cable between the two microStealth
units. Select CLONE only on the unit that you want to copy the
configuration to. Press the
Important
Be sure that the baud rate setting of your microStealth matches that
of the device that it is connected to (see BAUD RATE).
DIAGNOSTICS
Performs hardware diagnostics and defaults stored preferences to
factory presets. Press the
Baud Rate:
Date Bits:
Stop Bits:
Parity:
Flow Control:
softkey to begin the transfer.
key to access the diagnostics options.
same as your microStealth
8
1
NONE
Xon/Xoff
15