Configuring The Touchpanel (Advanced Settings Screen) - Crestron ST-1550 Operation Manual

1-way wireless rf touchpanels
Hide thumbs Also See for ST-1550:
Table of Contents

Advertisement

1-Way Wireless RF Touchpanels

Configuring the Touchpanel (Advanced Settings Screen)

Opening Screen for ST-1550 (top)
and ST-1550C (bottom)
Preferences and Settings Menu
Advanced Settings Screen
4 • 1-Way Wireless RF Touchpanels: ST-1550 & ST-1550C
It may be necessary to make adjustments or configure the touchpanel to
accommodate the preferences of the end user. Descriptions for preferences and
power management settings of the touchpanel are provided in the latest revision of
the SmarTouch Touchpanel User's Operations Guide (Doc. 5804).
Other configuration options are available through the Advanced Settings screen. To
access the Advanced Settings screen, it is necessary to restart the touchpanel.
The Opening Screen, shown to the left of this paragraph, appears when a finger is
held to the touchscreen for approximately three seconds as power is applied. This
screen indicates that you are in "setup mode" and can proceed to configure the
touchpanel.
Remove your finger and touch the Opening Screen again to display the Preferences
and Settings Menu, shown to the left of this paragraph. All resources to configure the
touchpanel are available from this menu.
The Advanced Settings button from the Preferences and Settings Menu opens the
Advanced Settings Screen, shown to the left of this paragraph.
The Advanced Settings Screen contains diagnostic buttons (Display EEPROM,
Display Touch Data, Firmware, Display Palette (Colorbar for ST-1550), and Self
Test). Diagnostic buttons should only be used under supervision of a Crestron
technical support representative during telephone support. These options are numeric
in nature and their interpretation is beyond the scope of this Operations Guide.
This screen also contains special settings buttons (DayLight Savings, Power Up On
Last Page, and Interface). Details of the special settings buttons are discussed in the
following paragraphs. Touch the RETURN button, located at the bottom of the
screen, to display the Preferences and Settings Menu.
Crestron ST-1550 & ST-1550C
Operations Guide – DOC. 5803A

Advertisement

Table of Contents
loading

This manual is also suitable for:

St-1550c

Table of Contents