Crestron ST-1550 Operation Manual page 13

Crestron ST-1550 & ST-1550C
Sequences + Scheduler Page
Schedule Event #1 Page
Schedule Event #2A Page with Time
Adjust Subpage Open
Schedule Event #2A Page with Date
Adjust Subpage Open
Schedule Event #2A Page with Cycle
Adjust Subpage Open
Operations Guide – DOC. 5803A
1. Touch the Schedule Event button (reserved join number = 3424) from
the Sequences + Scheduler page, shown to the left of this step.
2. Touch any button with a digital join number. The button may be one
that has a programmed sequence or one that initiates a specific function
(join number 1 through 999). In this example, the available buttons are
sequence buttons that are available from the Schedule Event #1 page,
shown to the left of this step.
3. To set the activation time for the event, touch the Adjust Time button
to open a subpage titled Time Adjust on the Schedule Event #2A page,
shown to the left of this step. Use the increment/decrement buttons to
increase and decrease the hours, minutes, and seconds of the event.
Each of these buttons have reserved join numbers.
NOTE: If the activation time is close to the current time, touch the Set Event Time
To Current Time button (join number 3360) to set the sample schedule time and
date to the current time. Then use the increment/decrement buttons as described in
the next step to make adjustments.
4. Touch the Hide Time Controls button to close the subpage when the
activation time for the event is set.
5. To set the activation date for the event, touch the Adjust Date button
to open a subpage titled Date Adjust on the Schedule Event #2A page,
shown to the left of this step. Use the increment/decrement buttons to
increase and decrease the year, month, and day of the event. Each of
these buttons have reserved join numbers.
6. Touch the Hide Date Controls button to close the subpage when the
activation date for the event is set.
7. The cycle of the event determines how often it occurs. To set the cycle
for the event, touch the Set Cycle button to open a subpage titled Cycle
Adjust on the Schedule Event #2A page, shown to the left of this step.
Available options for how often an event can occur are: Off (never
occurs), Once, Daily, Weekly, Weekdays, and Weekends. Each of
these buttons has a reserved join number.
8. Touch the Hide Cycle Controls button to close the subpage when the
activation cycle for the event is set.
1-Way Wireless RF Touchpanels: ST-1550 & ST-1550C • 9
1-Way Wireless RF Touchpanels