Table of Contents
Advertisement
1-Way Wireless RF Touchpanels
14 • 1-Way Wireless RF Touchpanels: ST-1550 & ST-1550C
(ST-1550) control environment with custom control graphics: icons, two and three-
dimensional buttons, and floor plans. The project is uploaded to the touchpanel's
flash PROM. The touchpanel uses the project until another is uploaded from the PC.
The PC may be disconnected from the control processor except when uploading a
project.
For additional software information, refer to the help file provided with the software.
The latest version of VT Pro-e can be obtained from the Downloads | Software
Updates section of the Crestron website (www.crestron.com).
Loading a Project
REMINDER: Every network device within Cresnet requires a unique identity code
(NET ID). These codes consist of a two-digit hexadecimal number from 03 to FE.
Matching NET IDs between the touchpanel and the VT Pro-e project is required. The
touchpanel NET ID setting is used only for uploading projects. For more information
on setting the NET ID, refer to "Interface" on page 5.
To load a program, refer to the figures shown after this paragraph for typical
connection diagrams. Complete the following steps provided to ensure proper
connection to the system.
Typical Connection Diagram when Uploading a Project from the ST-CP
15710 (PART OF ST-PK)
Typical Connection Diagram when Uploading a Project from the PRO2 or equivalent.
CRESTRON
ST-CBL (SOLD SEPARATELY)
CONTROL
SYSTEM
Crestron ST-1550 & ST-1550C
TOUCHPANEL
UNITS IN THIS ILLUSTRATION
ARE NOT DRAWN TO SCALE.
AC POWER PACK
(CRESTRON MODEL
OR EQUIVALENT)
15717 (PART OF ST-PK)
SERIAL
PORT
USE ADAPTER
(PART OF ST-PK)
CONTROL
SYSTEM
TOUCHPANEL
NOTE:
UNITS IN THIS ILLUSTRATION
ARE NOT DRAWN TO SCALE.
AC POWER PACK
(CRESTRON MODEL
OR EQUIVALENT)
PC
SERIAL
PORT
Operations Guide – DOC. 5803A
NOTE:
PC
Advertisement
Table of Contents
