Crestron ST-1550 Operation Manual page 12

1-Way Wireless RF Touchpanels
Obtain the latest version of VT Pro-e
from the Downloads | Software
Updates section of the Crestron
website (www.crestron.com)
Sequences + Scheduler Page
Learn Sequence #1 Page
Schedule Event #2 Page
8 • 1-Way Wireless RF Touchpanels: ST-1550 & ST-1550C
There are two buttons with reserved join numbers that must be touched when
developing a sequence. These buttons exist on the Home | Sequences + Scheduler
part of the Application Builder template, "st-1550c basic.vtt" (included with the
Crestron database), shown to the left of this paragraph. Copy or redraw these buttons
to another page so that the end user can use them as needed. One button, "Start
Sequence Learn", initiates the "learning" function and the other, "Finish/Cancel
Learn", terminates it. Complete the following steps to assign a programmable button
to a button sequence. It is assumed that the "Start Sequence Learn", "Finish/Cancel
Learn", and programmable buttons as well as the buttons to be included in the
sequence exist in the project available to the end user.
1. Touch the Start Sequence Learn button (reserved join number =
3072).
2. Touch the programmable button. Its join number must be within the
reserved join number range from 3200 to 3327. In template "st-1550/c
basic .vtt", a number of programmable buttons with reserved join
numbers were grouped onto a single page, Learn Sequence #1, as
shown to the left of this step.
3. Touch the Hit Here to Learn button at the bottom of the screen. The
opening menu of the project appears so that you can select buttons to
add to the sequence.
4. Touch the buttons in the sequence at the same speed that you would
like to be replicated. These buttons can be from any page in the project.
5. Each page in "st-1550/c basic.vtt" has a SEQ + SCHED button. Use
this button to return to the Sequences + Scheduler page after touching
all the buttons in the sequence.
6. Touch the Finish/Cancel Learn button (reserved join number = 3073)
from the Sequences + Scheduler page.
Scheduling a Sequence/Button Press
The purpose of scheduling a sequence or button is to initiate an event at a
programmed date and time. The programmed date and time is defined as the
activation time. It is assumed that the sequence has been developed as described in
the previous paragraph or the preferred button initiates a function. A Schedule
Event button (found on the Sequences + Scheduler page in "st-1550/c basic.vtt") has
a reserved join number (3424) and must be touched prior to pressing the button to be
scheduled. A sample schedule laid out on the Schedule Event #2 page, shown to the
left of this paragraph, is made available so that the time, date, and cycle of the event
can be entered.
There are a number of fields on this page that can be set by selecting the Adjust
Time, Adjust Date, or Set Cycle buttons. Each of these buttons causes a different
sub page to appear. Once the sample schedule information is assigned, it must be
transferred to one of thirty possible scheduled events. The Select Schedule button on
the Schedule Event #2 page opens the Schedule Event #3A page and permits the
end-user to save the schedule. Complete the following steps to schedule a sequence
or button.
Crestron ST-1550 & ST-1550C
Operations Guide – DOC. 5803A