Agilent Technologies InfiniiVision 3000 X- Series Advanced Training Manual page 68

3
Advanced Triggering, Search & Navigation, and Segmented Acquisition Labs
Figure 47 Triggering on Pattern = 1110 0110.
Your scope should now be triggering on logic pattern 1110 0110 (D7- D0),
and the top of the sine wave should be centered on- screen as shown in
Figure
can also display all of the digital channels of acquisition in an overlaid
bus display mode while displaying the HEX value of the bus. Let's now set
up the scope to show the bus display mode.
16
17
18
68
47. In addition to displaying individual digital channels, this scope
Press the [Digital] front panel key; then press the Bus softkey.
Press the Bus softkey two times to enable the B1 bus display mode.
Set the scope's timebase to 20.00 µs/div.
3000 X-Series Oscilloscopes Advanced Training Guide