Agilent Technologies InfiniiVision 3000 X- Series Advanced Training Manual page 103

Serial Bus Decoding & Triggering, Search & Navigation, and Segmented Acquisition Labs
Let's now use the scope's Segmented Memory mode of acquisition to
capture 500 consecutive occurrences of the LIN frame that the scope is
currently set up to trigger on (either ID = 21
complete the rest of this lab your scope must be licensed with the
Segmented Memory option.
27
28
29
30
31
32
33
34
Figure 77 Using the scope's Segmented Memory acquisition to selectively capture 500
3000 X-Series Oscilloscopes Advanced Training Guide
Push the horizontal position/delay knob to re- position the trigger point
back to center- screen.
Set the scope's timebase to 1.00 ms/div.
Press the [Run/Stop] front panel to begin repetitive acquisition again.
Press the [Acquire] front panel key.
Press the Segmented softkey; then turn the Entry knob to select 500 as
the number of segments to capture.
Press the Segmented softkey to begin a Segmented Memory acquisition.
Note that capturing this many consecutive occurrences of this particular
frame will take about 30 seconds.
Press the Current Segment softkey; then turn the Entry knob to review all
500 captured segments.
Set the Current Segment to 500 and note the time- tag of the last captured
segment.
LIN frames of a specific ID.
or ID = 12 ). But to
HEX HEX
4
103