Industry Compliance - Crestron DualTouch DTT-17 Operation Manual

Crestron DTT-17
8 DualTouch™ Technology Touchpanel: DTT-17
Controls and Indicators
A power on/off switch and a power LED are located in the upper right corner of the
DTT-17. The DTT-17 conforms to VESA and ENERGY STAR
guidelines. When using this device with a VESA Display Power Management
Signaling (DPMS) compliant computer or graphics card, the DTT-17 automatically
complies with the following power saving parameters.
The power indicator is orange when power is applied and no video source is
•
present.
The power indicator is blue when power is applied and a video signal is
•
applied.
The status indicator is blue when the DTT-17 senses the annotation pen
•
touchdown.
Status LED

Industry Compliance

As of the date of manufacture, the DTT-17 has been tested and found to comply with
specifications for CE marking and standards per EMC and Radiocommunications
Compliance Labeling.
NOTE: This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
DualTouch™ Technology Touchpanel
Power LED
Operations Guide – DOC. 6343
®
power savings
Power Switch