Cleaning - Crestron DualTouch DTT-17 Operation Manual

DualTouch™ Technology Touchpanel
Operations Guide – DOC. 6343
Grasp the worn tip with a pair of
needle-nose pliers, tweezers, or similar
instrument and pull out the tip.
NOTE: A badly worn pen tip may damage the surface.

Cleaning

Keep the pen and screen surface clean. Dust and dirt particles can stick to the pen
and cause wear to the screen surface. Regular cleaning will help to prolong the life of
your equipment.
•
To clean the outer casing, stand, and pen, use a soft cloth and a mild
detergent (such as dishwashing liquid) diluted in water. Do not use paint
thinner, benzene, alcohol or other solvents.
•
To clean the surface of the display screen, use an anti-static cloth or very
slightly dampened cloth. Apply only very light pressure and do not make
the screen surface wet. Never use detergents or solvents to clean the screen.
Firmly slide the new tip (square end first)
into the barrel of the pen and press in until
it stops.
DualTouch™ Technology Touchpanel: DTT-17
Crestron DTT-17
15