Table of Contents
Advertisement
Room Solution Box with Local Video
2 • Room Solution Box with Local Video: CNXRMCLV
Specifications
Detailed specifications for the CNXRMCLV are listed in the following table.
CNXRMCLV Specifications
SPECIFICATION
Power Requirements
Default Net ID
Head end video inputs
Local video source inputs
Local video outputs
Head End video outputs
Local audio inputs
Local audio outputs
Audio specifications
RS-232 communication
IR input
IR output
Sensor input
Indicators
CNXRMCLV Firmware
Control System Update Files
2-Series Control System
CNMSX-AV/PRO
CNRACKX/-DP
Environmental Temperature
Humidity
Dimensions
Weight
1.
The latest versions can be obtained from the Downloads | Software Updates section of the Crestron
website (www.crestron.com). Refer to NOTE on the next page.
2.
Crestron 2-Series control systems include the AV2, CP2, CP2E, MP2, MP2E, PAC2, PRO2, and
RACK2.
3.
CNX updater files are required for either CNMSX-AV/PRO or CNXRACKX/-DP. Filenames for
CNX update files have a UPZ extension. To avoid program problems, make certain you are using the
update file with the correct suffix letter (e.g., W or X).
Crestron CNXRMCLV
12 Watts (0.5 Amp @ 24 VDC)
42
RJ-45 CAT5 balanced video input (1-4), 100 Ohm
impedance, with cable length compensation on three
of the four signals.
All four inputs (5 – 8) have video sensor capability
(0.25 Vp-p)
4 RCA connectors labeled 5-8 with built-in 75 Ohm
termination.
8 RCA connectors labeled A-H, 75 Ohm impedance
RJ-45 for balanced video outputs E-H
6 RCA connectors for 3 line-level stereo sources A-C
4 RCA connectors for 2 line-level stereo outputs:
Primary (adjustable) and Record (fixed)
Maximum input level:
Maximum output level:
Impedance – Unbalanced
Impedance – Balanced
THD:
S/N ratio:
Gain range:
Volume steps:
Mute:
Bass control:
Treble:
RJ-11 connector
The RS-232 port can be used for the console as well
as RS-232-equipped device communication.
The RS-232 port supports data rates up to 115K baud
and RTS/CTS hardware handshaking.
1 Mini stereo phone jack–(power, ground, signal)
4 Mini mono phone jacks–(ground, signal)
Mini Cresnet 2 pin connector accepts power status
feedback from the optional CNXRMCS current sensor
(available separately).
PWR (Power), NET and SETUP LEDs
CNXRMCLV.51314r.upz or later
1, 2, 3
Version 3.015.CUZ or later
Version 5.13.12X.UPZ or later
Version 5.12.63W.UPZ or later
41° to 122°F (5° to 50°C)
10% to 90% RH (non-condensing)
Height:
1.94 in (4.93 cm)
Width:
11.60 in (29.46 cm)
Depth:
7.65 in (19.43 cm)
2.27 lb (1.02 kg)
Operations Guide - DOC. 8161A
DETAILS
3.2VRMS
2.5VRMS
10K input; 10 Ohm
output
600 Ohm input/output
<0.02%
>100dB
-80dB to +20dB
100 (1dB/step)
100dB
±12dB
±12dB
Advertisement
Table of Contents
