Advertisement
HD-MD-400-C-E
Enterprise Management Option
The optional .AV Framework
Hub
™
to enable centralized monitoring using
Management Software. A single "AVF Hub" can support up to 15
HD-MD-400-C-Es connected over an Ethernet LAN. Refer to the
CEN-AVF-HUB spec sheet for additional information.
Control System Integration
Fully programmable functionality can be enabled through integration with
a Crestron control system.
Low-Profile Installation
The transmitter and receiver components are each designed to be
mounted to a flat surface or placed on a shelf. Each component is compact
enough to fit discreetly inside a presentation lectern, beneath a table, on
a wall behind a flat-panel display, or on the ceiling above a projector. They
can even be attached to a single rack rail in the back of an equipment
cabinet. Both components are powered together using a single wall mount
power pack (included), which may be connected either at the receiver or
at the transmitter location. Power is carried between the transmitter and
receiver over the signal extension link connection.
Easy Setup
Simplified setup, configuration, and basic operation is provided through a
Web browser user interface. Essential controls and status indicators are
also provided on each unit for easy testing and troubleshooting without a
computer during installation.
SPECIFICATIONS
Video
Switcher: 3x1+1 (3 inputs at transmitter + 1 input at receiver) auto-
switching, auto-detecting multi-format digital/analog inputs; Crestron
QuickSwitch HD
technology
™
Scaler: HD video scaler and deinterlacer, noise reduction, 3:2/2:2 pull-
down detection and recovery, aspect ratio selection, VGA phase/clock &
H/V position adjustments, picture and RGB color adjustments
Input Signal Types: HDMI
w/Deep Color (DVI & Dual-Mode DisplayPort
®
compatible
); VGA/RGB (RGBHV, RGBS, RGsB); component (YPbPr)
[2]
Output Signal Types: HDMI w/Deep Color (DVI compatible
Input Resolutions, HDMI, Progressive: 640x480@60/72/75/85Hz,
720x480@60Hz (480p), 720x576@50Hz (576p),
800x600@56/60/72/75/85Hz, 848x480@60Hz, 852x480@60Hz,
854x480@60Hz, 1024x768@60/70/75/85Hz, 1024x852@60Hz,
1024x1024@60Hz, 1280x720@50/60Hz (720p50/60), 1280x768@60Hz,
1280x800@60Hz, 1280x960@60Hz, 1280x1024@60/75/85Hz,
1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz,
1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz
1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24/25/50/60Hz
(1080p24/25/50/60), 1920x1200@60Hz
165MHz pixel clock
Input Resolutions, HDMI, Interlaced: 720x480@30Hz (480i),
720x576@25Hz (576i), 1920x1080@25/30Hz (1080i25/30), plus any other
resolution up to 165MHz pixel clock
|
crestron.com
800.237.2041
HD Scaling Auto-Switcher & Extender 400
(CEN-AVF-HUB
) can be added
[9]
Crestron Fusion
Enterprise
®
)
[5]
,
[12]
, plus any other resolution up to
[12]
Input Resolutions, RGB/VGA, Progressive: 640x480@60/72/75/85Hz,
720x480@60Hz (480p), 720x576@50Hz (576p),
800x600@56/60/72/75/85Hz, 848x480@60Hz, 1024x768@60/70/75/85Hz,
1280x720@50/60Hz (720p50/60), 1280x768@60Hz, 1280x800@60Hz,
1280x960@60Hz, 1280x1024@60/75/85Hz, 1360x768@60Hz,
1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x1200@60Hz,
1680x1050@50/60Hz, 1920x1080@50/60Hz (1080p50/60),
1920x1200@60Hz
[12]
Input Resolutions, Component, Progressive: 480p, 576p, 720p50,
720p60, 1080p24, 1080p30, 1080p50 (1125 lines), 1080p60
Input Resolutions, Component, Interlaced: 480i, 576i, 1080i25 (1125
lines), 1080i30
Scaler Output Resolutions, HDMI, Progressive: 640x480@60Hz,
720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz,
840x480@60Hz, 1024x768@60Hz, 1280x720@50/60Hz (720p50/60),
1280x768@60Hz
[11]
1280x1024@60Hz, 1360x768@60Hz, 1366x768@60Hz
1400x1050@60Hz
[11]
1600x1200@60Hz, 1680x1050@60Hz
(1080p24/50/60), 1920x1200@60Hz
Scaler Output Resolutions, HDMI, Interlaced: 480i, 576i, 1080i25,
1080i30
Audio
Switcher: 3x1+1 (3 inputs at transmitter + 1 input at receiver)
auto-switching
Input Signal Types: HDMI (Dual-Mode DisplayPort compatible),
analog stereo
Output Signal Types: HDMI, analog stereo
Digital Formats: Dolby Digital
DTS 96/24, LPCM up to 8 channels
Analog Formats: Stereo 2-channel
Analog-To-Digital Conversion: 24-bit 48 kHz
Digital-To-Analog Conversion: 24-bit 48 kHz
Lip-Sync Delay: 0 to 150 ms (maximum delay time is reduced for input
signals with sampling rates over 48 kHz)
Analog Output Volume: -80 to +20 dB Level adjustment range, plus Mute
Analog Performance: Frequency Response: 20 Hz to 20 kHz ±0.5 dB;
[3]
Communications
Ethernet: 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery,
full/half duplex, DHCP, Web browser setup and control, Crestron control
system integration
USB: USB Host port for firmware update
RS-232: 2-way device control and monitoring up to 115.2k baud with
hardware and software handshaking
IR: (Reserved for future use)
HDMI: HDCP 1.2, EDID, CEC
NOTE: Supports management of HDCP and EDID; supports management of
CEC between the connected HDMI devices and a control system
, plus any other resolution up to 165MHz pixel clock
, 1280x800@60Hz
[11]
, 1280x960@60Hz,
, 1440x900@60Hz
, 1600x900@60Hz
[11]
, 1920x1080@24/50/60Hz
[11]
[12]
[6]
, Dolby Digital EX, DTS
®
[6]
S/N Ratio: >93 dB, 20 Hz to 20 kHz A-weighted;
THD+N: <0.005% @ 1 kHz;
Stereo Separation: >80 dB
,
[11]
,
[12]
, DTS-ES,
®
Advertisement
