Checking The Contact List; Configuration And Security Check - Bodet GSM CONTROL Installation And User Manual

3.3.8. Checking the contact list

Steps Command to be sent by SMS
29
TEST

3.3.9. Configuration and security check

Steps Command to be sent by SMS
30
TEST
31
STATUS
32
SET
For greater security, once commissioning has been completed and the system has been tested for proper
operation, we recommend changing the previously set PIN code (1513).
Sending the command by SMS (see above): SET PIN 1234 #1513
Important: Do not lose the new SIM card PIN code. A return to factory settings does not change the SIM card
PIN code. After a return to factory settings, the default PIN code expected by the GSM control box is: 1513.
16
TEL #GX #PINcode
GX #PINcode
#PINcode
PIN NEWPINCODE #PINcode
New PIN code to customise
Description
Identification of saved contacts
(name and location) in each group.
(X= 1,2,3,4,5)
Replace GX successively with G1, G2,
G3, G4 and G5.
Description
Checking the rights assigned for each group.
(X= 1,2,3,4,5)
Replace GX successively with G1, G2, G3, G4 and G5.
Refer to Section 3.2.2 Contact list and Rights Management
to perform the check.
Indication of the product status at the current time for
checking the configuration.
Changing the PIN code.
Old default PIN code
EN
Check that
groups G1,
G2, G3 and G4
contain distinct
contact names.