Table of Contents
Advertisement
SETTING UP THE REMOTE
(OPTIONAL PROGRAMMING)
PAIRING THE REMOTE
Determine which blind(s) you wish to pair to the
handheld remote.
Press the PROGRAMMING BUTTON b on each of the
SMART WAND™(s) you wish to pair to the remote
until you hear a SINGLE BEEP (1) [Fig. 30], then
release.
reflect the desired channel you wish to set
Press the CHANNEL button until the LEDs
[Fig. 31].
Use a tack or pen to press and release the
PAIRING button on the back of the remote
to confirm.
[Fig. 32] When this button has been pressed,
the LED's on the front of the remote will scroll
To PAIR, press the top left button on the tilt toggle [Fig. 33]. The blind(s)
will jog down and up showing that it has received the command and
completed the process. If you ever need to unpair, you can repeat the
same steps and press the bottom button on the tilt toggle to unpair
[Fig. 33.1].
CH
1
2
3
4
5
Figure 33; Push To Pair
28
Figure 30;
Push and Hold
CH
CH
1
1
1
1
2
2
2
2
3
3
3
3
4
4
4
4
5
5
5
5
Figure 31; Push Channel
Button
Figure 32; Press in Tack
CH
1
2
3
4
5
Figure 33.1; Push to Unpair
SETTING THE FAVORITE BUTTON
The FAVORITE Button allows the user to program a slat position
unique to the user which moves all slats included on that channel to
the user's favorite position.
To program the FAVORITE Button, twist the SMART
WAND™ until the desired position is reached.
(3), then release. [Fig. 34].
Next, press and hold the PROGRAMMING BUTTON b
on the SMART WAND™ until you hear a TRIPLE BEEP
Your FAVORITE Button is now programmed to move
that blind to your favorite position. Each SMART
WAND™ can be set to have different favorite positions.
After all SMART WAND™ (s) are set, test by moving your
blinds, then pressing the FAVORITE Button. All blinds
on that channel should move to their programmed
favorite position.
Figure 34;
Push and Hold
Programming
Button
29
Advertisement
Table of Contents
