Table of Contents
Advertisement
Next, install the UNIVERSAL TILT GEAR G .
Determine the size and shape of
the rod located in your header.
Locate the ADAPTER from the
selection supplied which matches
your rod shape and size and snap
into the UNIVERSAL TILT GEAR G
[Fig. 28].
Figure 28; Snap in Attachment
Place the gear's stem through the
opening in the header and slide the
rod through the gear to its original
position [Fig. ]. If a rod pin or the
end brackets were removed while
removing the corded tilt gear,
replace back into their original
position.
Figure 29; Slide gear stem through
header
You are now ready to reinstall your blinds and install the SMART WAND.
Please proceed to the Horizontal Blinds Installation Guide [Pg. 9].
22
23
Advertisement
Table of Contents
