Sound Adjustments; Adjusting The Sound; Reinforcing The Bass Sound - JVC KD-SH909 Instructions Manual

Adjusting the sound

You can adjust the sound characteristics to your
preference.
1
Select the item you want to adjust.
Each time you press the button,
the adjustable items change as
follows:
FADER*
(Fader) (Balance)
VOLUME
(Volume)
Indication To do:
FADER* Adjust the front
and rear speaker
balance.
BAL Adjust the left
and right speaker
balance.
WOOFER** Adjust the
subwoofer output
level.
***
VOL ADJ See "To adjust the
input level of each
source" on the
right column
VOLUME Adjust the volume.
*
If you are using a two-speaker system, set the
fader level to "00."
** This takes effect only when a subwoofer is
connected.
*** Not adjustable when the source is FM. "FIX" will
appear.
2
Adjust the level.
Note:
Normally, the control dial works as the volume
control. So you do not have to select "VOLUME" to
adjust the volume level.

SOUND ADJUSTMENTS

BAL WOOFER**
(Subwoofer)
VOL ADJ***
(Volume adjust)
Range
R06 (Rear only)
|
F06 (Front only)
L06 (Left only)
|
R06 (Right only)
00 (min.)
|
12 (max.)
–12 (min.)
|
+12 (max.)
00 (min.)
|
50 (max.)
To increase the level.
To decrease the level.

Reinforcing the bass sound

The richness and fullness of the bass sound is
clearly maintained regardless of how low you set
the volume – Extended Bass.
• You can also adjust the level of Extended Bass.
1
Press E - BASS (EB) (Extended
Bass).
"EX BASS" appears on the
display.
E-BASS
Each time you press the button, Extended Bass
turns on or off alternately.
To adjust the input level of each source.
You can adjust the input level of each source
except FM, and store it in memory.
By adjusting the input level properly to match it
to the FM sound level, you will not need to
adjust the volume level each time you change
the source.
27