Sound Adjustments; Selecting Preset Sound Modes; (Eq: Equalizer); Adjusting The Sound - JVC KW-XC410 Instructions Manual

Sound adjustments

Selecting preset sound modes

You can select a preset sound mode suitable to
the music genre.
~
Ÿ
FLAT O Hard Rock O R & B O
POP O JAZZ O DanceMusic O
Country O Reggae O Classic O
USER 1 O USER 2 O USER 3 O
(back to the beginning)
To select the sound mode directly
You can select the sound mode directly using
the remote controller.
18

(EQ: equalizer)

Adjusting the sound

You can adjust the sound characteristics to your
preference.
1
2
Indication
FADER*
1
Adjust the front and rear
speaker balance.
BAL (balance)
Adjust the left and right
speaker balance.
LOUD (loudness)
Boost low and high
frequencies to produce a
well-balanced sound at low
volume level.
VOLUME*
2
Adjust the volume.
1
* If you are using a two-speaker system, set
the fader level to "00."
2
* Normally the control dial works as the
volume control. So you do not have to select
"VOLUME" to adjust the volume level.
3
* Depending on the amplifier gain control
setting. (See page 22 for details.)
Range
R06 (Rear only)
to
F06 (Front only)
L06 (Left only)
to
R06 (Right only)
LOUD ON
LOUD OFF
00 (min.) to
30 or 50 (max.)* 3