Locating A Track Or Particular Portion On A Cd - JVC KD-SH909 Instructions Manual

To return the control panel to its previous
position, press 0 again.
• If you keep the loading slot open for one
minute (or 30 seconds when you have ejected
a disc with the ignition key turned to "OFF"), a
beep sounds and the control panel returns to
its previous position.
Be careful not to get the disc or your finger
caught in between the control panel and the
unit.
Note:
If the ejected disc is not removed within 15 seconds,
the disc is automatically inserted again into the
loading slot to protect it from dust. (CD play will not
start this time.)
Locating a track or particular
portion on a CD
To fast-forward or reverse the track
Press and hold ¢
while playing a disc, to
fast-forward the track.
Press and hold
while playing a disc, to
reverse the track.
To go to the next or previous tracks
To go to a particular track directly
Press the number button corresponding to the track
number to start its playback.
• To select a track number from 1 – 6:
Press 1 (7) – 6 (12) briefly.
4
• To select a track number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than 1
second.
Press ¢
briefly while
playing a disc, to go ahead
to the beginning of the next
track. Each time you press
the button consecutively, the
beginning of the next tracks
is located and played back.
4 briefly while
Press
playing a disc, to go back to
the beginning of the current
track. Each time you press
the button consecutively, the
beginning of the previous
tracks is located and played
back.
Track number
Elapsed playing time
15