How To Use The Mode (M) Button; How To Change The Display Patterns - JVC KD-SH909 Instructions Manual

How to use the MODE (M) button:

If you press MODE (M), the unit goes into functions mode and the number,
DISP (D) work as different function buttons.
MODE
To use these buttons for their original function (ex. as the number buttons) again after pressing
MODE (M), wait for 5 seconds without pressing any of these buttons until the functions mode is cleared.
• Pressing MODE (M) again also clears the functions mode.

How to change the display patterns:

This unit is equipped with two display indication patterns – with or without the source symbol
animation.
To change the display patterns, press MODE (M), then press DISP (D) within 5 seconds. Each
time you press DISP (D), the display patterns change as follows.
CAUTION on Volume Setting
CDs produce very little noise compared with other sources. If the volume level is adjusted for the tuner, for
example, the speakers may be damaged by the sudden increase in the output level. Therefore, lower the
volume before playing a disc and adjust it as required during playback.
4
Ex.: While receiving an FM station.
(Initial setting)
Note:
The display ilustrations used in this manual are with the
source symbol animations and with "CLOCK" set "ON"
(see page 32).
During functions mode:
Time countdown indicator lights up
4/¢
and