Table of Contents
Advertisement
RUGGEDCOM WIN7000
Installation Guide
Installation Procedures
Section 3.1
Pre-Installation Safety Instructions
WARNING!
Installing the WIN7000 can pose a serious hazard. Be sure to take precautions to avoid the following:
• Exposure to high voltage lines during installation
• Falling when working at heights or with ladders
• Injuries from dropping tools
• Contact with AC wiring (power system connection)
Section 3.2
Package Components and Unpacking
Check that the package contains:
• WIN7000.
• GPS antenna
• 2 × RF cables 1.6 m for connection to antenna
• Pole / wall mount kit
• WINPS 48V power supply for Copper and SFA configuration
Section 3.3
Installation Tools
• Phillips screwdriver
• Wrench or socket set
• Drill and 5/16" drill bit
• Self-fusing electrical tape or insulating putty suitable for use in the unit's installation environment
Pre-Installation Safety Instructions
Chapter 3
Installation Procedures
9
Advertisement
Table of Contents
