Secure ThermoPlus AS1 User Operating Instructions Manual page 7

Programmable room thermostat

Warm and Cool Temperature Adjustment

The Warm and Cool target

Press here to select Warm or Cool

temperature settings on the

ThermoPlus AS1 are fully

adjustable.

To change a

target temperature it is ﬁrst

necessary to press the the

centre button to bring up the

'Warm'

or 'Cool'

setting

(Indicated by the red or blue

LED indicators). By using the

up/down keys under the ﬂap

the 'Warm/Cool' temperature

can

increased

decreased to the desired

temperature setting

PLEASE NOTE - it is not possible to set the warm setting to

below that of the cool setting or vice versa.

Once a new temperature has been set on either the Warm or

Cool setting the AS1 will continue to use this setting until the

next manual adjustment.

PLEASE NOTE - The AS1 will display any temporary

change the user has made by pressing the + or - buttons, this

does not indicate a permanent change in either the Warm or

Cool settings, the temperature will return to the pre-set levels

at the next switching period. During an override the 'Warm'

or 'Cool' setting will not be displayed on the LCD.

Table of Contents