Logging Out; Viewing The End-User License Agreement - Cisco FM1200 Installation And Configuration Manual

1. Click the -reboot link under MANAGEMENT SETTINGS in the
left-hand settings menu.
• The unit reboot dialog will be shown
139)).
Figure 63. Configurator GUI (unit reboot dialog)
2. Reboot the unit by clicking the YES link. Alternatively, abort the
reboot by clicking the NO link.
• If the YES link was clicked, the unit will reboot.

7.7.8. Logging out

If clicked, the logout option logs the current user off the unit, and out of the
Configurator interface.
• To log out, click the -logout link under MANAGEMENT
SETTINGS in the left-hand settings menu.
• You will be logged off the unit and out of the Configurator
interface with no further prompting.
• The web browser will show the Authentication Required
dialog
log in again.
Figure 64. Web browser (Authentication Required
dialog)

7.7.9. Viewing the end-user license agreement

The License Agreement window contains the Cisco end-user
license agreement for the Cisco FM1200 Volo, its firmware and control
software.
© 2021 Cisco and/or its affiliates. All rights reserved.
Device configuration using the configurator interface
(Figure 64 (page 139)). If needed, use the dialog to
(Figure 63 (page
Page 139 of 175