Cisco FM1200 Installation And Configuration Manual page 87

the network has been installed, making it easier to visualize component
placement, line-of-sight between antennas, and other factors.
To add an aerial terrain map to the FM-QUADRO view, do the following
steps:
1. Get an aerial image of the area in which the wireless network and
LAN are installed. The image must conform to the following
requirements:
• Image formats: *.PNG, *.JPG, *.JPEG or *.SVG only.
• File size: Less than or equal to 500 Kilobytes (FM1000 and
FM10000 Gateways only), or less than or equal to 150
Kilobytes (all radio transceivers).
• Images can be uploaded to FM-QUADRO using Google
Chrome, Firefox, Safari or Microsoft Internet Explorer.
Cisco recommends using the latest version of Google
Chrome or Firefox.
2. Click the Settings icon on the upper right part of the FM-
QUADRO view (below).
• The Appearance / Background dialog will be shown.
3. If the Appearance settings are shown, click the Background
heading.
4. Click the Image radio button.
• Upload your file and Preview sections will be shown.
5. Use the Upload your file section to upload the aerial image.
6. To save your changes, click the Save changes button.
Alternatively, click the Discard button to leave the dialog without
saving any changes.
• Your chosen aerial image will be shown as a visual layer
underneath the current network view.
7. If needed, move the device icons and/or tooltips to suit the aerial
image as shown in
icons" (page
© 2021 Cisco and/or its affiliates. All rights reserved.
Device configuration using the configurator interface
TIP
Suitable aerial images can be created and
downloaded using
instructions on how to use Google Earth are
available here.
"Changing the relative position of device
83).
Google Earth. Basic
Page 87 of 175