Using Vector Pro - AccuSport Vector Pro User Manual

charged. If the battery is low and needs charging, Vector Pro will emit a
beeping sound.

Using Vector Pro

How important is ball placement?
Ball placement is crucial. If the ball is not placed in the correct hitting
area or is not at the stated 14 inches, +/- 1 inch, from the launch
monitor, the ball capture or launch data will be affected. The Setup
Template indicates where the ball should be placed for set-up and
hitting.
How do I charge the battery?
To charge, plug the Vector Pro into an outlet via the AC adapter, making
sure the power switch on the Vector Pro is set to the "Off" position.
Allow the unit to charge overnight or for at least six hours.
Do the preference settings have a significant impact on ball
flight?
Preferences related to altitude and weather do impact ball flight. The
ball will fly higher and farther at high altitude than at sea level.
Therefore, if you set your preferences for Colorado, and then take your
Vector Pro to Florida, you must change the preferences, or Vector Pro
will show the ball going farther and higher than it would actually travel.
For the most accurate readings, you should set the preferences
according to the conditions that you are in.
Wind direction should be set at zero degrees if the ball flies directly into
the wind, at 180 degrees if the ball flies downwind, at 90 degrees if the
wind is coming from the right, and at 270 degrees if the wind is coming
from the left.
Does it matter what kind of golf balls I use?
We recommend using a white ball with as few markings as possible, so
that the software can clearly read the two dots or line you have drawn
on the ball. Be sure the ball is properly marked (page 26.)
Vector Pro User Guide v2.1 Page 48 October 2008