Table of Contents
Advertisement
Video Camera Installation (Optional)
If you are using a video camera with Vector Pro, follow these steps for one-
time installation before the first use. If you are not using a video camera,
proceed to step 6.*
1. Power on the video camera and computer.
2. Plug the camera into the computer.
5. Start the Vector Pro software by double clicking the Vector Pro icon on
your computer desktop.
7. Click Preview to see streaming video from your camera.
8. Click OK to close the dialog box.
The camera icon in the upper left corner of the screen will glow green when
a video camera is connected. It will be red if no camera is connected.
To change to another camera, repeat the above steps for the new camera.
If your camera is turned on and video does not appear in the video
window, click the camera icon in the upper left corner. When the Camera
Settings box opens, click Use Video. Click OK to close the box. Back on
the Instruction screen, streaming video appears in the Swing Video
window. Refer to this live video as you position and focus the camera to
capture the swing.
Vector Pro User Guide v2.1
3. When the Windows Digital Video Device dialog box
opens, click Take No Action. Click the check box that
says Always perform the selected action.
4. Click OK to close the Digital Video Device dialog box.
6. When the Camera Selection dialog box
appears, click the camera drop down and
select your camera. The video form and
frame rate will automatically appear in the
dialog box. *If you are not using a video
camera, uncheck Use Camera and click
OK.
Page 24
October 2008
Advertisement
Table of Contents
