Prior To Software Installation (Windows Vista) - AccuSport Vector Pro User Manual

Prior to Software Installation – Windows Vista
The following steps should be taken to ensure the Power Options on a
Windows Vista based computer are set correctly in order to work with
the Accusport Vector Pro Launch monitor and Software.
Power Options Settings
1) Select the Windows Vista Start Button
2) Select the Control Panel
3) Select Power Options (You may have to Select the "Classic View" link
in the top right corner of the window in order to view the 'Power
Options' icon)
4) Select High Performance
5) Next, select Change Plan Settings
Note: For the following procedure the "On Battery" setting is only available on
laptop computers. For Desktop computers the "On battery" and 'Plugged In" labels
are not present but the layout is similar. This procedure can still be used to ensure
Desktop Computers with power saving features are set-up correctly for the Vector
Pro.
6) Select the Put the Computer to Sleep option
o Set "On Battery" to Never by clicking on the down pointing arrow
next to the "minute" numerals and selecting 'Never'.
o Set "Plugged In" to Never by clicking on the down pointing arrow
next to the "minute" numerals and selecting 'Never'.
7) Select the Change Advanced Plan Settings link. (A new window will
be displayed)
o Select the plus (+) sign next to the Hard Disks label and set all
displayed "Minutes" to read Never by holding down the left
mouse button on the down pointing arrow next to the minute
numerals until the "Minutes" display reads 'Never'.
o Select the plus (+) sign next to the "Turn off Hard Disks After"
label Set all displayed "Minutes" to read Never by holding down
the left mouse button on the down pointing arrow next to the
minute numerals until the "Minutes" display reads 'Never'.
Vector Pro User Guide v2.1 Page 10 October 2008