Table of Contents
Advertisement
October 2008
If the Top camera brightness warning appears*,
though you can continue by clicking 'OK', we
recommend choosing Retry and resetting the
brightness to
(+/-)
*can be disabled in Preferences.
If the brightness numbers are not within the
specified suggested range, a final warning
message will appear. While you may bypass
this message by clicking 'OK', we recommend
clicking Retry and resetting the brightness to
3 of 155 on both camera lenses. This will
(+/)
ensure optimal results during shot capture.
If camera lens calibration is not successful, go
back and repeat the setup procedure as
instructed. Otherwise, click Next.
To readjust these settings later, access the
Setup Wizard by clicking Options in the menu
bar of the Vector Pro screen. Click Close.
Page 23
3 of 155 for optimal results.
Vector Pro User Guide v2.1
Advertisement
Table of Contents
