Hitting Your First Shot; Switching Modes Of Operation - AccuSport Vector Pro User Manual

Hitting your first shot:

After hitting the ball, check the quality of the image in the lower
right of the screen. Vector Pro must have a clear image of the shot in
order to measure ball flight parameters. If a clear ball image does not
appear, or if you receive the message, "Analysis Terminated," move the
tee position slightly down range or up range for the next shot. The
marks on each ball should be clear, ball dimples should be
distinguishable and ball outlines should be completely visible – not
fading into darkness or cut off the edge of the screen. You can verify
that the images are correct by choosing Options and selecting Show
Advanced Mode.

Switching Modes of Operation

To toggle among the three Vector Pro modes, Instruction, Fitting and
Practice, click the forward or backward arrow of the large navigator in the
upper left corner of the screen.
Instruction
Swing video, used primarily by golf teachers, is unique to the Instruction
Mode. Shot Profile and Club Analysis offer additional information.
Large Navigator
Vector Pro User Guide v2.1 Page 26 October 2008