Setting Up; Charging The Battery - AccuSport Vector Pro User Manual

After installing the software, you can access the Vector Pro User
Guide at anytime by clicking Help in the menu bar of the Vector
Pro screen.
NOTE: Always use the same USB port on the computer that the
drivers were initially installed on.

SETTING UP

Charging the Battery

If you are using a fully charged battery, no AC power source is needed.
If the battery is not charged, or if you will be using the Vector Pro for an
extended time period, use the AC adapter to plug into an electrical
outlet.
To charge the battery, plug the Vector Pro into an outlet via the AC
adapter, making sure the power switch on the Vector Pro is set to the
"Off" position. Allow the unit to charge overnight or for at least six
hours.
October 2008 Page 19 Vector Pro User Guide v2.1