Default Screen; Comfort Temperature; Fan Speed - Carrier WTC-RCI-D Manual

Default Screen

The default screen may vary according to
installer configuration and additional options
such as lights control, blinds control, etc.
The default screen displayed on the user
interface may inform you about the
current room temperature or the comfort
temperature, or neither of them.
Example:
Room temp. 21.0°C
Comfort temp. 19.5°C
Mode: Cooling
Mode: Cooling
Occupancy: Occupied
Occupancy: Occupied
Fan speed: Medium
Fan speed: Low
No temp. displayed
Mode: Satisfied
Occupancy: Occupied
Fan speed: Off

Comfort Temperature

To achieve better comfort, it is possible to
control the comfort temperature when the
status of the room is occupied.
The comfort temperature is adjusted in steps.
Comfort temp. steps: -4 / -3 / -2 / -1 / 0 / 1 / 2 / 3 / 4
To set the comfort temperature
Press the Up button
■
to set the comfort temperature step.
Example:
Comfort temp. step:
+ 4
When the comfort temperature step is
■
set, press the Menu button
go to the next screen or wait 5 seconds
to go back to the default screen.
Note: Comfort temperature can be
adjusted only when the status of the
room is occupied.
or the Down button
to
Settings
To modify settings
Press the Menu button
■
the Edit menu.
Press the Up button
■
to edit the displayed value.
Press the Menu button
■
access the next Edit screen.
On the Exit screen:
■
- Press to go back to the first Edit screen.
- Press or to return to the default screen.
The default screen is displayed automatically
after 10 seconds without any user action.
All changes are effective immediately.
No validation is required.

Fan Speed

Unoccupied: Fan speed is adjusted
automatically.
Occupied: Fan speed is adjusted
automatically to achieve optimum comfort
OR set manually.
To set the fan speed
Press the Menu button
■
until the Fan speed screen appears.
Press the Up button
■
to set the fan speed.
Low speed = 1
Medium speed = 2
High speed = 3
Fan Auto: Fan speed is adjusted
automatically in order to provide
optimum comfort
Fan Off
When the fan speed is set, press
■
go to the next screen or wait 10 seconds to
go back to the default screen.
Example:
Fan speed: OFF Fan speed: Medium
Note: Fan speed can be adjusted only when
the status of the room is occupied.
to access
or the Down button
again to
repeatedly
or the Down button
to
3