Parts List; Product Use; Installation Concerns - Nuna Bugaboo Turtle Air Instruction Manual

Parts list

Make sure all parts are available before assembly.
The infant carrier module and base can be
sold separately. If any part is missing, please
contact Bugaboo (see page 3 for information).
No tools are required for assembly.
1 ISOFIX Connector
2 ISOFIX Guides
3 Load Leg Adjust
Button
4a Side Impact Protection
Wings
4b Wing Fold Back Button
5
1
2
6
BGB Nuna Turtle Air Wingbase UG A6 Part1.indb 6-7 BGB Nuna Turtle Air Wingbase UG A6 Part1.indb 6-7
5 ISOFIX Adjust Button
6 Infant Carrier Module
Release Button
7 Load Leg Indicator
8 Instruction Manual
Storage Compartment
6
7
4a
4b
8
3

Product use

Installation concerns

DO NOT install this enhanced child restraint on
vehicle seats that face sideways or rearward with
respect to the moving direction of the vehicle. (1)
Installation
1 Unfold the load leg from storage compartment. (2)
2 Fit the ISOFIX guides with the ISOFIX anchor
points. (3) The ISOFIX guides can protect the
surface of the vehicle seat from being torn. They
can also guide the ISOFIX connectors.
3
Press the ISOFIX Adjust Button to adjust the
ISOFIX connectors. (4)
4
Line up the ISOFIX connectors with the ISOFIX
guides, and then click both ISOFIX connectors into
the ISOFIX anchor points. (5)
Make sure that both ISOFIX connectors are
securely attached to their ISOFIX anchor points.
There should be two audible clicks and the colors
of the indicators on the both ISOFIX connectors
should be completely green. (5)-1
Check to make sure the base is securely installed
by pulling on the both ISOFIX connectors.
7
14-07-2020 17:13 14-07-2020 17:13