Taking Pictures; Loading The Film P12; Auto Focus P14 - Concord Camera PZ3300 Instruction Manual

Auto Focus (Focus Lock)
1. Aim the subjects through the finder eyepiece.
2. Center the auto-focus frame mark over the main subjects, and then press the release
button halfway down to lock the focus.
3. While still pressing the button halfway down, move the camera until your subjects are
where you want them within the frame.
4. Press the shutter button completely down to take the picture.
14
Loading the film
1 2
1.Check through the film cartridge confirmation window to make sure there is no film in
the camera.
2.Slide the back cover opening latch upward to open the back cover.
3.Load the film cartridge and pull the film tip across to the film tip mark.
4.Make sure that the film lies flat and is positioned between the film guides.
5.Close the back cover, and check if the film counter on the LCD panel automatically
advances to the first frame, then "1" displays on the LCD panel.
Note:1. Be sure not to open the film cover after you start taking pictures, or you will ruin
the film.
2.If "1" does not appear on the LCD after loading the film, it means that the film is
not loaded properly. Please reload the film correctly.
12
1. Turn on the power.
2. For date/time adjustment, press "DATE" button until "
3. Repeat (2) step until the "hour", "minute" , "year" and "month" time are set all
* Calendar year: 2001 to 2031 are stored in memory.
4. After you finish, press "DATE" button to exit the adjustment mode.
5. If the Date imprinting is not desired, press "DATE" button to select "-----" mode.
1. Turn on the power. When you turn the camera on, the lens cover automatically opens.
4
3
1
2. Hold the camera steady with both hands, and be sure not to block the flash, autofocus
'02 6 26 3. If you want to enlarge the subjects, press the zoom Tele (T) button, and press Wide (W)
* Focus range: 0.9m~°¤
4. Look through the finder eyepiece and compose
5. Press the shutter release button halfway, and the
Note:
When "
After the blinking stops, you can continue taking the next picture.
Date and Time Adjustment (YMD/HM)
1 26 18 15 2
26 18 15
26 18 15
25 18:15
'02 6 26
MODE MODE MODE
'02 6 26
press the " " button to set the desired date.
correct.
11

Taking pictures

window or lens with your fingers.
button to take wide-angle shots. The lens can be zoomed out and in at six positions
between Tele and Wide freely subject to user's selection.
your subjects within the AF frame mark.
AF (green) lamp will light up in the same time,
then fully press it to take a picture.
" on the LCD panel is blinking, which indicates the flash is charging.
13
3
4
'02 6 26 '02 1 1 '02 6 1
25
" is blinking, and then