Precaution / Care And Storage P3 - Concord Camera PZ3300 Instruction Manual

Problem Possible cause
Self-timer mode does not . If the camera is now on the
work Date setting mode
The picture is blurred . You did not aim the
autofocus spot correctly.
. The lens glass is not clean
. You jiggled the camera
when you pressed the
shutter release button.
. You did not use a tripod
when shooting in the night-
scene mode.
22
Auto film re-wind
Automatic start at end of film, automatically stop upon completion of rewinding. The
power will shut off automatically
1. After the end of the film has been reached, the film will automatically rewind.
2. When the film starts to rewind, the frame counter starts to counter down and "E" will
display on the LCD panel when the film rewinding is completed.
3. Open the back door to unload the film.
Mid-roll rewind
The film may be rewound before the roll of the film is finished. Press the "
to mid-roll rewind the film if you don't want to continue taking the remaining film.
20
Solution
. cancel the date setting
mode
. Make sure that the
autofocus spot is on your
subjects, or use the
autofocus lock to take the
picture.
. Clean the lens
. Hold the camera still with
both hands and press the
shutter release button
gently.
. use a tripod.
AF Lamp
Finder eyepiece
" button
Spool
Film Tip top
Precaution / Care and Storage
In order to get the best performance from this sophisticated designed
camera and keep safe-use of it, the following needs to be specially noticed:
1. The camera is not water resistant, and should not be used outdoors if it's raining or
snowing.
2. Protect the camera from dust, moisture, sudden impact, and excessive heat.
3. Don't attempt to disassemble the camera yourself, since there is high-voltage
circuitry inside.
4. Please use a lintless cloth to clean gently in one direction the surface of lens when
cleaning. Do not use chemically treated tissues intended for cleaning eyeglasses.
5. The battery may be shorted when exposed to high temperature, or disposed of in
fire.
6. Remove the battery when the camera is not used in a long time.
7. Keep batteries away from children.
8. Keep the auto-focus windows clean to ensure accurate focusing. If they get dirty,
wipe them clean with soft cloth.
9. Pad the button of the camera with foam-rubber when traveling in a car, ship, or
airplane. Violent vibration could cause damage to the camera.
10. Make sure the tripod screw fits the camera before installing.
3
5
Back cover
strap eyelet
Film cartridge
chamber
Battery switch
Battery cover
Tripod bush