Advertisement
Red-Eye reduction - Built-in, lamp will light for a period 1.0 seconds before the flash.
1. Press mode button until red-eye reduction mark "
2. Shooting with flash mode in dark places, the subject's eyes may appear red in the
picture. This phenomenon is known as "red-eye" and occurs when flash reflects back
from the retina. This mode can contract the pupils of the subject and reduce the
chances of red-eye.
3. As there is a delay effect for the red-eye reduction lamp to function, please press the
button and hold the camera steady until shutter releases.
Self-timer
1. Press the "
" button until the "
" mark appears on the LCD. This mode allows
you to join the picture you are taking with the camera on a steady support.
2. Press the shutter release button.
3. The self-timer lamp will light up for approx. 7 seconds, then blink for approx. 3
seconds. After that, the shutter will release. It could combine with all kinds of the flash
modes.
4. To press the Power button could cancel the self-timer shooting.
18
Auto Flash - The camera will flash automatically when in a low light.
Flash on mode: Press the Mode button until "
will fire whenever taking pictures. In backlit situations, it is recommended to use this
mode.
Flash off mode: Press the Mode button until "
will not fire even in a low light. When you don't want to use flash for a more nature
effect or when the use of flash is forbidden in some places.
* It is recommended to use a tripod (tripod socket) or place the camera on another firm
support when taking pictures in dark places.
16
" shown on LCD panel
ough the loop and
" is displayed on the LCD. The flash
" is displayed on the LCD. The flash
LCD Indicators
Flash indicator
(on/off/charging)
Red-eye reduction
Remote control
(Optional)
Battery check
7
Attaching the strap
Slide the small loop end of the strap
through the strap eyelet (Fig.1) and then
pass the other end thr
tie the strap onto the strap eyelet (fig.2)
Fig.1
Fig.2
Loading the battery
1. Turn off the power
2. Open the battery chamber cover
3. Insert one CR123 lithium battery with the
correct positive (+) and negative (-) polarity.
Note:
1. Before shooting, please check the battery power at first.
2. Be sure to re-set the date after changing a new battery.
3. When traveling or planning to take many pictures, it is recommended to bring a
spare battery just in case.
9
Landscape
Night scene
Film counter
Self-timer
Date / Time imprinting
Advertisement
