Problem Possible cause Solution Self-timer mode does not . If the camera is now on the . cancel the date setting work Date setting mode mode . Make sure that the The picture is blurred . You did not aim the autofocus spot is on your autofocus spot correctly.
Red-Eye reduction - Built-in, lamp will light for a period 1.0 seconds before the flash. 1. Press mode button until red-eye reduction mark " " shown on LCD panel 2. Shooting with flash mode in dark places, the subject's eyes may appear red in the picture.
Auto Focus (Focus Lock) 1. Aim the subjects through the finder eyepiece. 2. Center the auto-focus frame mark over the main subjects, and then press the release button halfway down to lock the focus. 3. While still pressing the button halfway down, move the camera until your subjects are where you want them within the frame.
Power on/off Press the power button. When power is on, the lens cap will open and LCD is set to auto mode. Note: The power will be turned off automatically after being idle for 7 minutes. Checking the battery power The battery power shows on the LCD by the indicator anytime.
Finder eyepiece Mid-roll MODE rewinding Mode button Self-timer / Remote control set button Nomenclature Shutter release button Red-eye reduction indicator Self-timer indicator Remote control (Optional) Lens / Lens cap Remote Control (Optional) 1. Please hold your camera on a steady supports (tripod). AF Lamp 2.
Need help?
Do you have a question about the PZ3300 and is the answer not in the manual?
Questions and answers