Transport the surgical microscope and secure it in its
installation location
Pull the power plug from the socket and wrap the power
¸
¸
cable around the handle.
Hook in the footswitch to the clip.
¸
¸
Step on the footbrake release lever (4) to release the
¸
¸
footbrakes.
Push the surgical microscope to its new location by the
¸
¸
handle (3).
Lock the footbrakes at the installation location.
¸
¸
Caution
Surgical microscope can move without warning!
Always secure the footbrakes when you are not
¸
¸
moving the system.
2
3
4
2
4
4
Leica M620 F20 / Ref. 10 714 371 / Version 00
Positioning the surgical microscope at the
operating table
Caution
Danger of fatal electrical shock!
The surgical microscope may be connected to a
¸
¸
grounded socket only.
Carefully move the surgical microscope to the operating
¸
¸
table using the handle and position it for the forthcoming
operation.
2
Tighten the footbrakes.
¸
¸
Plug the power cable (3) into the socket and secure it with
¸
¸
cable ties (2).
Connect the potential equalization to the socket (1) on the
¸
¸
control unit.
Connect the footswitch to the socket (4) on the control unit.
¸
¸
Preparation Before Surgery
1
4
2
3
15